Zoom Q4 Podręcznik Użytkownika Pobierz pdf (Strona 10)

Control Modes

There are 5 modes: • Built-in Programs

• Auto Run

• Sound-controlled

• Master/Slave

• DMX512: Person1 (10CH)

Person2 (16CH)

Person3 (21CH)

Person4 (8CH)

Person5 (21CH)

One Expression 8000 (Built-in Programs)

1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.

2. Always use a safety cable (ordercode 70140 / 70141).

3. When the Expression 8000 is not connected by a DMX-cable, it functions as a stand-alone device.

Please see page 20 for more information about the Built-in Programs options.

Multiple Expressions (Master/Slave control)

1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.

2. Always use a safety cable (ordercode 70140 / 70141).

3. Use a 3-p XLR cable to connect the Expression 8000.

The pins:

1. Earth

2. Signal -

3. Signal +

4. Link the units as shown in (Fig. 3), Connect a DMX signal cable from the first unit's DMX "out" socket to

the second unit's "in" socket. Repeat this process to link the second, third, and fourth units. You can

use the same functions on the master device as described on page 20 (Built-in Programs). This means

on the master device you can set your desired operation Mode and all slave devices will react the

same as the master device.

Multiple Expressions (Master/Slave control)

Fig. 3

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 39 40

Brak uwag

Zoom Q4 Podręcznik Użytkownika Strona 10