Zoom PCI Internal Instrukcja Obsługi

VALCam Pro with Flash VALCam Zoom with Flash Introduction Thank you for purchasing the VALCam ID, the first image acquisition system

10 2. Adjust the Camera motion controls to frame the live image. 3. Use the Zoom controls to zoom in to the subject. It is always recommended to zo

11 camera is changed. The setting is saved to an INI file (VALPCIZOOM.INI) and is saved between sessions. NOTE: When the Use Flash Yes radio button

12 Adjusting Camera and Capture Parameters All camera and capture adjustments are applied through the Adjust dialog box. Separate settings can be a

13 Note: All current and previous hardware versions of Video Associates Labs are supported. If you are using an earlier version of our camera, the d

14 4. Click the or buttons on the main screen to adjust the live preview brightness level. 5. Adjust the Red and Blue controls. If th

15 9. Click the Capture button on the main screen to acquire an image. 10. Click the Restore Defaults button to reset all controls to their defau

16 Note: It is always recommended to zoom in as tight as your image composition will allow for the highest image quality. 1. Click the Capture butto

17 5. Adjust the Color Level control for optimal color intensity. If this value is too low, images will appear pale. If this value is too high colors

18 Setting an Administrators Password 1. Locate and double click on the VALPCIZoom.INI file located in the Windows folder or sub folder. 2. The fil

19 Quick Tips for Quality Capture 1. Adjust camera controls to frame subject. 2. Zoom in as tight as your image composition will allow, for highes

2 Features Include: • Mouse control of pan, tilt, zoom and exposure in Pan/Tilt/Zoom version and zoom in the Zoom version. • Uses optical pan, tilt,

20 Trouble Shooting 1. “Camera Not Found” dialog box displayed when trying to start the application. a. Verify that all cable and camera connections

21 a. . 3. The application runs fine when started on it’s own, but I cannot make it run from my application. a. Verify that you have selecte

22 5. The Photo-Flash is not triggered. a. Verify that the Photo-Flash is turned on. b. Verify that the power supply connection is properly connecte

3 Parts List for available VALCam products: 6500-630 VALCam Pro with Flash High resolution S-video camera with pan/tilt/zoom VideoVue PCI capture

4 Quick Start hardware installation NOTE: All cable connectors and matching receptacles have been color coded for easy installation 1. Install the

5 Pan/Tilt/Zoom Pro Camera connections 1. Attach the flash-mounting bracket to the bottom of the camera. 2. Attach your tripod-mounting block to th

6 3. Attach the connector on the flash unit to the matching connector on the Zoom Camera. 4. Locate the multi-cable and attach the brown/black 25

7 3. Immediately after booting, a dialog box indicates that new hardware has been found. Insert the installation diskette for your operating system i

8 2. Confirm that the display settings of your computer are set to a high color mode (16,24 or 32 bit). 3. Click on START->PROGRAMS->VALCam Fl

9 2. Place the mouse over the button and hold down the left mouse button. The camera will zoom in. When the mouse button is released, zooming will