Zoom Wireless-N Router Instrukcja Użytkownika Pobierz pdf (Strona 49)



DHCP

The DHCP page allows you to configure your Cable Modem/Router’s DHCP server.

To access the DHCP page:

1 Click Basic in the menu bar.

2 Then click the DHCP submenu.

Figure 10 shows an example of the menu and Table 6 describes the items you can

select.

Figure 10. Example of DHCP Page

In the unusual event that you have a separate DHCP server on your LAN, you can

disable the Cable Modem/Router’s DHCP server by selecting the No radio button. If you

do this, make sure the IP address assigned to the Cable Modem/Router is on the same

subnet as that of the external DHCP server, or you won’t be able to access the Cable

Modem/Router from the LAN. The base LAN IP address of the Cable Modem/Router can

be set from the Basic Setup page.

Note that the Cable Modem/Router will only operate on a class C subnet, with subnet

mask 255.255.255.0

You may also want to disable the DHCP server if you have assigned static IP addresses

to all devices on your network.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 114 115

Brak uwag

Zoom Wireless-N Router Instrukcja Użytkownika Strona 49